KUKA KCP KR C1 69-000-422 KUKA KCR-VKR C1 69-000-399 Repair
Supply KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 Teach Pendant Parts, Membrane Keypad, LCD Display and Protective Case Shell Replacement
Switching on the kuka krc1 control cabinet.
After you have correctly installed and connected your robot system, you can start it up for the first time.
Turn on the main switch of your control cabinet. The computer integrated into the control cabinet begins to load the programs and data required for operation from the hard disk. You can follow the run-up phase of the controller on the KCP1 display. The run-up phase is concluded after approximately 3 minutes and the main menu of the KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 Membrane Switch, LCD Display Panel, Front Case, Back Cover, Case Accessories, Cable, E-Stop Button, Switch Cover, Mode Selector Switch and E-Stop Contact is displayed.
As the EMERGENCY STOP button is pressed at this stage (and the EMERGENCY STOPcircuits of the periphery may not have been wired up yet), the robot cannot yet be moved. Appropriate messages are displayed on the KCP to inform you of this.
The video below describes the product details of the KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 Controller Keypad LCD Display and Case(shell).
Related Kuka SmartPAD Models :
|KUKA SmartPAD||Description||Inventory status|
|KUKA KRC4 00-216-801 00-189-002||KUKA Krc4 Kit Repair Parts||In Stock|
|KUKA KRC4 6D Mouse||KUKA Krc4 6D Mouse||Available Now|
|KUKA KRC4 AMT9552||KUKA Krc4 Touchscreen Repair||In Stock|
|KUKA KRC4 Mode Selector Switch||Krc4 Mode Selector Switch Repair||Available Now|
|KRC4 RAFIX 22 FS+ 1.30.273.501/0300||KUKA Krc4 E-Stop Switch Repair||In Stock|
|KUKA KRC4 Rubber Protective Cover||Krc4 Rubber Protective Cover Repair||Available Now|
|KUKA KRC4 Touch Pen||KUKA Krc4 Touch Pen Replacement||In Stock|
|KUKA KRC5 00-291-556 SMARTPAD-2||Cable for KUKA Krc5 Replacement||Available Now|
|KUKA KRC5 00-320-102||KUKA Krc5 Cable Repair||In Stock|
|KRC5 00-320-104 SMARTPAD-2||KUKA Krc5 Cable 10m Replacement||Available Now|
|KUKA KRC5 6D Mouse||6D Mouse for Krc5||In Stock|
|KUKA KRC5 Mode Selector Switch||Cable for KUKA Krc5 replacement||In Stock|
|KUKA Smartpad Controller||Krc1 Krc2 Krc4 Kit Repair||In Stock|
|LM8V302||LCD for Krc1 Krc2 Replacement||In Stock|
|NEW! KUKA KRC4 CK||KUKA Krc4 Kit Replacement||In Stock|
|KUKA Teach Pendant||Description||Inventory status|
KUKA SmartPAD Manuals PDF Download:
Question: How to operate a KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 controller?
Answer: 1) Generate your KUKA controller programs on the PC and transfer them to the robot. You can set up file sharing in Windows 95 and connect the robot up to your network. One word here -KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 does not allow you to copy programs directly into its active /programs folder.
You must copy it somewhere else on the C:, make sure the teach pendant is in expert mode, and copy/paste the programs into the right spot on the teach pendant, because KRC1 needs to feel special about it and compile the program as it pastes in. If you are doing some milling type work then make sure each of these files does not exceed 100k or so in size.
2) Use a PLC + DeviceNet or some other supported card in your KRC1 to transfer your position data/command via registers. KRC1 likes registers.
3) Just buy a KRC4 robot with the right control comm package and save your sanity.
Question: What is the KUKA KCR-VKR C1 69-000-399 KUKA KCP KR C1 69-000-422 controller price of membrane keypad with case(shell), LCD Display?
Answer: Submit a fast quote, send VICPAS an email for best price.
More Details about KUKA SmartPAD Controller Parts