6FC5203-0AF08-0AA0 Membrane Keypad and Touch Panel

Order each part separately is available

Description of Siemens 6FC5203-0AF08-0AA0 Membrane Keyboard HMI Panel Glass
The SINUMERIK TP 015A 6FC5203-0AF08-0AA0 touch operator panel front and 15"TFT color display with a resolution of 1024 x 768 pixels (XGA)and touch screen features a 62-key membrane keyboard as well as 2 x(8+2) horizontal and 2 x 8 vertical softkeys and an integral mouse. The 2 x 8 vertical softkeys can be used as direct keys. The 6FC5203-0AF08-0AA0 Operator Keyboard Touch Panel operator panel front is secured from the rear using special clamps supplied with the panel.

Operation of 6FC5203-0AF08-0AA0
The operator panel front is operated by using the touch screen to select the application-specific functions,e.g.by touching one of the displayed buttons, softkeys, keys and mouse. Do not touch the operating elements of 6FC5203-0AF08-0AA0 Membrane Switch Touch Digitizer Glass with pointed or hard objects. This may considerably reduce their service lives. You will find information about softkeys in \BAD\Operator's Guide HMI Advanced or \BEM\Operator's Guide HMI Embedded.

The front and rear side of 6FC5 203-0AF08-0AA0 Touch Screen Monitor Keyboard Membrane
The front interface of Siemens 6FC5203-0AF08-0AA0 Touch Screen Film Membrane Keyboard is USB 1.1 to connect an external keyboard or mouse. Note that the electromagnetic compatibility of commercially available peripheral devices operated via the USB port is usually rated for office use only. For industrial use, components of 6FC5203-0AF08-0AA0 HMI Panel Glass Terminal Keypad with a higher degree of certification are recommended. The rear interface has two cables for connecting the PCU: I/O USB cable K1 (ribbon cable): All signals that are used for the display interface and the connection of 6FC5203-0AF08-0AA0 operator panel fronts (e.g.supply voltages) and Display cable K2.