2706-M1D1 2706-M1F 2706-M1F1 2706-M1N Membrane Keyboard Keypad

Allen Bradley InView Message Displays 2706-M1F 2706-M1F1 Membrane Switch Replacement

Attention

1. Do not operate the terminal if the cable is damaged or pinched. To avoid damaging the cable, do not place the cable over or around sharp objects.
2. Use a soft, damp cloth with 50% water and 50% isopropyl alcohol to clean 2706-M1F 2706-M1F1 Keypad Membrane. Do not use solvents, scouring agents, or scrubbing sponges.
3. Turn off the power supply before you remove the back cover of the terminal. When the back cover is removed, the terminal is sensitive to electrostatic discharge (ESD).
4. Do not use sharp objects, such as a screwdriver, on InView Message Displays 2706-M1F 2706-M1F1 Membrane Switch. Scratching the surface of the keyboard can damage the display and compromise the IP rating.
5. To avoid damage to the operating elements, do not set the terminal on its operating side.
6. To avoid impact damage to Allen Bradley Inview 2706 2706-M1F 2706-M1F1 Terminal Keypad, do not set the terminal on unstable surfaces and keep the cable clear of high traffic areas.
7. Help prevent foreign objects or liquids from getting into the terminal. Check Allen Bradley Inview 2706 2706-M1F 2706-M1F1 Operator Keyboard regularly. Verify that all screws are firmly tightened and that the housing and cable entrance are not damaged.
8. When the terminal is not in use, hang the terminal on the mounting bracket (ordered separately) or place inside a cabinet or enclosure.

Specifications:

The table below describes the parameters of the Allen Bradley InView Message Displays 2706-M1F 2706-M1F1 Membrane Switch Keypad.

Related Allen Bradley HMI Part No. :

Allen Bradley InView Message Displays Manuals PDF Download: